电子产品世界

Resistive sensors configured as Wheatstone bridges
are primarily used to sense pressure, temperature or
loads. An external A/D converter (ADC) and a digitally
Programmable Gain Amplifier (PGA) can easily be used
to convert the difference voltage from these resistor
bridge sensors to usable digital words for manipulation
by the microcontroller. When the PGA is used in this
system, the other channels of the MCP6S2X can be
used for other sensors without an increase in signal
conditioning hardware or PICmicro
®
microcontroller I/O
pin consumption. The multiplexer and high-speed con-
version response of the PGA/Analog-to-Digital (A/D)
conversion allows a differential input signal to be sam-
pled and converted in the analog domain and then
subtracted in the digital domain with the microcontroller.
M AN251
Bridge Sensing with the MCP6S2X PGAs

Author: Bonnie C. Baker BRIDGE DATA ACQUISITION
Microchip Technology Inc. SYSTEM
An application circuit for this type of sensor environment
INTRODUCTION is shown in Figure 1.
Resistive sensors configured as Wheatstone bridges In this circuit, the bridge is excited by a voltage source
are primarily used to sense pressure, temperature or (VSEN). This reference

关键词： MCP6S2X    桥接遥感   PGA