SKYWORKS射频PCB设计指南
上传用户：zhuanjifen
上传日期：2013-09-22
文件类型：PDF
文件大小：130.29K
资料积分：0分 积分不够怎么办？
SKYWORKS射频PCB设计指南PREPARED BY:
Wing Djen
APPROVALS:
5211 California Avenue, Irvine, CA 92617
REVISION: 0.1 DATE 08/26/2005 PAGE 1 OF 6
PROPRIETARY INFORMATION NO DISSEMINATION OR USE ALLOWED WITHOUT PRIOR WRITTEN PERMISSION TITLE:
TYPE OF DOCUMENT:
Layout Guidelines for the SKY74137 and SKY77331
SKYWORKS SOLUTIONS, INC. PROPRIETARY INFORMATION
SKY74137 Control Registers Preliminary 02/02/05 PAGE 2 OF 6
1. Introduction:
This document provides layout guidelines for the SKY74137 EDGE transceiver and SKY77331 EDGE PA.
2. Layout Guidelines: 2.1 Components Placement
Figure 1 shows the recommended placement of the SKY74137, SKY77331, T/R switch, and SAW filters. The following general rules should be followed: Traces between the PA (U4) and T/R switch (U3) should be kept as short as possible to redu
Wing Djen
APPROVALS:
5211 California Avenue, Irvine, CA 92617
REVISION: 0.1 DATE 08/26/2005 PAGE 1 OF 6
PROPRIETARY INFORMATION NO DISSEMINATION OR USE ALLOWED WITHOUT PRIOR WRITTEN PERMISSION TITLE:
TYPE OF DOCUMENT:
Layout Guidelines for the SKY74137 and SKY77331
SKYWORKS SOLUTIONS, INC. PROPRIETARY INFORMATION
SKY74137 Control Registers Preliminary 02/02/05 PAGE 2 OF 6
1. Introduction:
This document provides layout guidelines for the SKY74137 EDGE transceiver and SKY77331 EDGE PA.
2. Layout Guidelines: 2.1 Components Placement
Figure 1 shows the recommended placement of the SKY74137, SKY77331, T/R switch, and SAW filters. The following general rules should be followed: Traces between the PA (U4) and T/R switch (U3) should be kept as short as possible to redu
关键词： SKYWORKS 射频 设计 指南
加入微信
获取电子行业最新资讯
搜索微信公众号：EEPW
或用微信扫描左侧二维码