传一篇关于LNA设计的文章
上传用户：zhuanjifen
上传日期：2013-09-22
文件类型：PDF
文件大小：2349.78K
资料积分：0分 积分不够怎么办？
Small-Signal-Amplifier-Design-and-MeasurementFundamentals of RF Circuit Design with Low Noise Oscillators. Jeremy Everard Copyright 2001 John Wiley & Sons Ltd ISBNs: 0-471-49793-2 (Hardback); 0-470-84175-3 (Electronic)
3
Small Signal Amplifier Design and Measurement
3.1 Introduction
So far device models and the parameter sets have been presented. It is now important to develop the major building blocks of modern RF circuits and this chapter will cover amplifier design. The amplifier is usually required to provide low noise gain with low distortion at both small and large signal levels. It should also be stable, i.e. not generate unwanted spurious signals, and the performance should remain constant with time. A further requirement is that the amplifier should provide good reverse isolation to prevent, for example, LO breakthrough f
3
Small Signal Amplifier Design and Measurement
3.1 Introduction
So far device models and the parameter sets have been presented. It is now important to develop the major building blocks of modern RF circuits and this chapter will cover amplifier design. The amplifier is usually required to provide low noise gain with low distortion at both small and large signal levels. It should also be stable, i.e. not generate unwanted spurious signals, and the performance should remain constant with time. A further requirement is that the amplifier should provide good reverse isolation to prevent, for example, LO breakthrough f
关键词： Small-Signal-Amplifier-Design-and-Measurement
加入微信
获取电子行业最新资讯
搜索微信公众号：EEPW
或用微信扫描左侧二维码