可控硅可靠设计---------ST公司资料， 精！！！！
上传用户：zhuanjifen
上传日期：2013-09-18
文件类型：PDF
文件大小：133.75K
资料积分：0分 积分不够怎么办？
Design Rules for Triac Reliabilty Operation-★☆
DESIGN NOTE
DESIGN RULES FOR RELIABLE TRIAC OPERATION
1/ CORRECT TRIGGERING: To turn a triac ON, the gate drive circuit must supply an “energetic” gate current to ensure fast and efficient firing. Gate current amplitude: The gate current (IG) must be much higher than the specified maximum gate triggering current (IGTmax). This parameter is given at Tj = 25°C. For lower temperatures, use the curve which presents the relative variation of the gate triggering current versus junction temperature. Design the gate driver for the lowest expected operating temperature. A high IG value provides an efficient firing (see §2). As a practical rule we recommend: I G > 2 I GTMAX Gate circuit design: Fig. 1: Example of gate drive circuit.
VG
+VDD
Rs
+
MCU
IG
230 Vac
VOL
LOAD
Rs =
With :
V DD
DESIGN NOTE
DESIGN RULES FOR RELIABLE TRIAC OPERATION
1/ CORRECT TRIGGERING: To turn a triac ON, the gate drive circuit must supply an “energetic” gate current to ensure fast and efficient firing. Gate current amplitude: The gate current (IG) must be much higher than the specified maximum gate triggering current (IGTmax). This parameter is given at Tj = 25°C. For lower temperatures, use the curve which presents the relative variation of the gate triggering current versus junction temperature. Design the gate driver for the lowest expected operating temperature. A high IG value provides an efficient firing (see §2). As a practical rule we recommend: I G > 2 I GTMAX Gate circuit design: Fig. 1: Example of gate drive circuit.
VG
+VDD
Rs
+
MCU
IG
230 Vac
VOL
LOAD
Rs =
With :
V DD
关键词： Design Rules Triac Reliabilty Operation-
加入微信
获取电子行业最新资讯
搜索微信公众号：EEPW
或用微信扫描左侧二维码