Manual MTF PRO3_4 change sett...
上传用户：zhuanjifen
上传日期：2013-09-18
文件类型：PDF
文件大小：1246.41K
资料积分：0分 积分不够怎么办？
Manual PRO 3_4_change settings for 3_axis controller9. November 2004
Short Manual PRO 3 / 4 Change Setting for 3-axis controller Changing the acceleration of the stages
1. Close the ImageMaster PRO software 2. Switch on the 3 axis controller “L-Step” and switch on “Auto” 3. Open the link on the desktop called “WIN-Commander” 4. Connect the 3 axis-controller to the PC by using this settings
Pic. 1: Start of the software Win Commander to program the 3-axis controller
TRIOPTICS GmbH Hafenstrasse 39 D-22880 Wedel, GERMANY
Phone: Fax:
+49-4103-18006-0 +49-4103-18006-20
e-mail: WWW:
info@trioptics.com http://www.trioptics.com
5. Change the acceleration to 0.25m/s2 for all three axis. The speed of the stages is not so important.
Pic. 2: change acceleration values to 0.25m/s2 6. Open hardware configuration menu for the stages
Bild 3 X-/Y
Short Manual PRO 3 / 4 Change Setting for 3-axis controller Changing the acceleration of the stages
1. Close the ImageMaster PRO software 2. Switch on the 3 axis controller “L-Step” and switch on “Auto” 3. Open the link on the desktop called “WIN-Commander” 4. Connect the 3 axis-controller to the PC by using this settings
Pic. 1: Start of the software Win Commander to program the 3-axis controller
TRIOPTICS GmbH Hafenstrasse 39 D-22880 Wedel, GERMANY
Phone: Fax:
+49-4103-18006-0 +49-4103-18006-20
e-mail: WWW:
info@trioptics.com http://www.trioptics.com
5. Change the acceleration to 0.25m/s2 for all three axis. The speed of the stages is not so important.
Pic. 2: change acceleration values to 0.25m/s2 6. Open hardware configuration menu for the stages
Bild 3 X-/Y
关键词： Manual change settings controller
加入微信
获取电子行业最新资讯
搜索微信公众号：EEPW
或用微信扫描左侧二维码