镍氢/镍镉电池开关模式电池充电器的dV / dt充电终止
上传用户：soothmusic
上传日期：2012-05-20
文件类型：PDF
文件大小：54.54K
资料积分：0分 积分不够怎么办？
摘要：该电路包括电池充电器（ MAX712 ）处理充电器的电源部分和降压开关稳压器（ MAX5089 ） 。通过控制稳压器为电池充电控制器MAX712的行为，生产为7V至16V的输出。从任何能够提供所需的快速充电电流，这种情况必须等于输出电压的总和（二加系列充电电池的数量）乘以1.7V的直流电源。
Maxim > App Notes > Battery Management Power-Supply Circuits
Keywords: switchmode battery chargers, NiMH/NiCd battery chargers, stepdown regulators, constant-current supplies, dV/dt termination Aug 09, 2010
APPLICATION NOTE 4496
NiMH/NiCd Switchmode Battery Charger Has dV/dt Charge
Termination
Abstract:This circuit includes a battery charger (MAX712) and step-down switching regulator (MAX5089) for handling the power
portion of the charger. By controlling the regulator the MAX712 acts as a battery-charge controller, producing outputs of 7V to
16V. It operates from any DC source capable of delivering the desired fast-charge current, with this condition: the output voltage
must equal 1.7V multiplied by the sum of (two plus the number of batteries to be charged in series).
A similar v
Maxim > App Notes > Battery Management Power-Supply Circuits
Keywords: switchmode battery chargers, NiMH/NiCd battery chargers, stepdown regulators, constant-current supplies, dV/dt termination Aug 09, 2010
APPLICATION NOTE 4496
NiMH/NiCd Switchmode Battery Charger Has dV/dt Charge
Termination
Abstract:This circuit includes a battery charger (MAX712) and step-down switching regulator (MAX5089) for handling the power
portion of the charger. By controlling the regulator the MAX712 acts as a battery-charge controller, producing outputs of 7V to
16V. It operates from any DC source capable of delivering the desired fast-charge current, with this condition: the output voltage
must equal 1.7V multiplied by the sum of (two plus the number of batteries to be charged in series).
A similar v
关键词： Maxim switchmode battery chargers NiMH/NiCd battery chargers stepdown regulators constant-current supplies dV/dt termination
加入微信
获取电子行业最新资讯
搜索微信公众号：EEPW
或用微信扫描左侧二维码